Aruba AP-80MB, Installation Manual

Page: 41 / 46

T
ABLE
C-2 Aruba 80 Characteristics (Continued)
Description
Interfaces
(Electrical): AP-80MB & AP-80SB Common Interfaces
1 x 10/100 Base-TX (8-Pin DIN Connector)
auto-sensing Ethernet interface:
Auto-sensing MDI/MDX
PoE 48V DC / 1.2A power over Ethernet (not
compliant with 802.3af)
8-Pin DIN to RJ-45 CAT-5 Ethernet Cable
Supplied (30 m / 100 ft
1 x RSSI Low Voltage BNC Interface (not used)
1 x Electrical Ground Point with built-in lightening
arrester
AP-80MB Only Interfaces
1 x 2.4Ghz N-Type, Female, Detachable Antenna Interface
1 x 5Ghz N-Type, Female, Detachable Antenna Interface
AP-80SB-Only Interfaces
2 x 2.4Ghz N-Type, Female, Detachable Antenna
Interfaces (supports radio signal diversity)
Interfaces
(Mechanical): 4 x Mounting Bracket Hex Screw Mounting Points
Ruggedized wall, pole or mast mount hardware
provided (articulating in horizontal and vertical planes)
Visual Indicators
(LEDs) Ready -- Power on/off (provided on Power Injector)
Power Requirements AP-80MB and AP-80SB Power Draw: 48 VDC, 1.2 A, 30 W maximum
AP-AC-80-1 Indoor-rated Power Injector Kit
Power Injector, auto-sensing 100-240V AC Input, 1.5A. Output 48 VDC, 1.2
A power over Ethernet (not compliant with 802.3af)