Aruba 800-E, Installation Manual

Page: 14 / 52

Installing the Chassis
Chapter 2
6 Aruba 800-E 0500191
Installation Guide November 2005
Precautions
Requirements
C
AUTION
: Hazardous energy is always present while the Aruba
800-E Access Multiplexer is plugged into an electrical
outlet. Remove all rings, jewelry, and other potentially
conductive material before working with this product.
Never insert foreign objects into the chassis or any other
component, even when the 800-E Access Multiplexer is
unpowered or unplugged.
Main power is fully disconnected from the 800-E Access
Multiplexer by unplugging the power cord from the power
outlet. For safety reasons, verify the power outlet and plug
are within easy reach of the operator.
Do not handle electrical cables which are not insulated.
This includes any network cables.
To minimize electrical hazard, keep water and other fluids
away from the product.
Comply with electrical grounding standards during all
phases of installation and operation of the product. Do not
allow the 800-E Access Multiplexer chassis, network
ports, power source, or mounting brackets to contact any
device, cable, object, or person attached to a different
electrical ground. Also, never connect the device to
external storm grounding sources.
Installation or removal of the chassis must be performed in
a static-free environment. The proper use of anti-static
body straps and mats is strongly recommended.
Do not ship or store this product near strong
electromagnetic, electrostatic, magnetic, or radioactive
fields.
Do not disassemble the chassis. This product has no
internal serviceable parts. When service or repair is
needed, see
“Contacting Aruba Networks” on page 43 .