Russia/Belarus/Kazakhstan/CEE Safety:
Power supply instructions
During the installation, ensure that AC power is NOT connected to the Power Supply.
Shock hazard
To completely remove power from the switch,
disconnect all power cords.
For more information, see the
Power over Ethernet (PoE/PoE+) Planning and Implementation Guide
on the
Hewlett Packard Enterprise Information Library at
http://www.hpe.com/support/manuals
.
Interior Wiring
Warning
Brazil Statement
Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia
elétrica que possua aterramento (três pinos), conforme a Norma NBR ABNT 5410,
visando a segurança dos usuários contra choques elétricos.)
Battery Statements:
The only indicator of battery failure is the failure of the switch internal clock to keep the correct time
across a reboot or power cycle. If a battery failure occurs, contact your authorized Aruba
representative for assistance. Batteries are not customer-serviceable and battery failures should be
referred only to service personnel authorized by Aruba.
For important safety, environmental, and regulatory information, see
Safety and Compliance
Information for Server, Storage, Power, Networking, and Rack Products
, available at
http://www.hpe.com/support/Safety-Compliance-EnterpriseProducts
ATTENTION
ll y a danger d'explosion s'il y a remplacement incorrect de la batterie.
Remplacer uniquement avec une batterie du même type ou d'un type équivalent
recommandé par le constructeur.Mettre au rebut les batteries usagées conformément
aux instructions du fabricant.
12
Aruba 3810M Switch Quick Setup Guide and Safety/Regulatory Information
