Aruba 303P Series Campus Access Points
| Installation Guide
9
Power:
Direct DC source: 48Vdc nominal, +/- 5%
Power over Ethernet (PoE): 802.3af/802.3at/802.3bt compliant source
Connect only to IEC 60950-1 or IEC 60601-1 products and power sources.
Environmental
Operating:
Temperature: 0
°
C to +40
°
C (+32
°
F to +104
°
F)
Humidity: 5% to 93% non-condensing
Storage and transport
Temperature: -40
°
C to +70
°
C (-40
°
F to +158
°
F)
Regulatory Information
The following regulatory model names apply to the 303P Series access points:
AP-303P: APINP303
FCC
To view the FCC ID for controller-managed access points:
1. Log into the controller WebUI
2. Navigate to Maintenance > Controller > About
To view the FCC ID for Instant access points:
1. Log into the virtual controller WebUI
2. Navigate to Maintenance > About
If a power adapter other than the Aruba-approved adapter is used in the US or Canada, it should be NRTL
listed, with an output rated 48Vdc, minimum 1A, marked “LPS” and “Class 2”, and suitable for plugging into a
standard power receptacle in the US and Canada.
!
The Aruba 303P Series access points are for indoor use only. The access point, AC adapter, and all connected
cables are not designed for outdoor use.
!
RF Radiation Exposure Statement:
This equipment complies with RF radiation exposure limits. This
equipment should be installed and operated with a minimum distance of 13.78 inches (35cm) between the
radiator and your body for 2.4 GHz and 5 GHz operations. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
!
Déclaration de la concernant l’exposition aux rayonnements à fréquence radioélectrique (FR):
Cet
appareil est conforme aux limites d’exposition aux rayonnements FR établies par la FCC. Il doit être installé et
utilisé à une distance minimale de 35 cm (13,78 pouces) entre le radiateur et votre corps, qu’il opère sur la
bande 2,4 GHz ou 5 GHz. Cet émetteur ne doit pas être installé ou utilisé à proximité immédiate d’une autre
antenne ni d’un autre transmetteur.
!
Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
!
Toute modification effectuée sur cet équipement sans l'autorisation expresse de la partie responsable de la
conformité est susceptible d'annuler son droit d'utilisation.
