MSR1200 Installation Guide 4
1. Panel
Front Panel LED
The table below lists the meanings of the LEDs on the MSR1200:
Table 1-1 MSR1200 LED Status Indicators
LED
Color
QTY Definition
Power
Green
1
Displays the power or connection status:
•
Dark: No power to the unit
•
Green: Unit has power
RADIO0
Green
1
Displays the Radio 0 link status:
•
Dark: Radio 0 is not providing either access (SSID) or backhaul
(mesh) service
•
Green: Radio 0 is providing access (SSID) service or backhaul
(mesh) service
RADIO1
Green
1
Displays the Radio 1 link status:
•
Dark: Radio 1 is not providing either access (SSID) or backhaul
(mesh) service
•
Green: Radio 1 is providing access (SSID) service or backhaul
(mesh) service
E0 10/100
Green
1
Display the Ethernet 0 status:
•
Dark: No uplink on the Ethernet port
•
Green: The link speed is 10M or 100M
E0 1000
Green
1
Display the Ethernet 0 status:
•
Dark: No uplink on the Ethernet port
•
Green: The link speed is 1000M
Note
Starting with MeshOS 4.5, you can turn off the LEDs in the MSR1200 devices using the WMI and the
CLI. The LEDs are enabled by default. This option may be used to disable the LED lights in a
MSR1200 device to avoid unwanted attention or disturbance. This feature turns off only the LED lights
that indicate the software status, for example the RF. The LEDs that indicate the hardware status, for
example Power, P/S, POE, and ETH, cannot be turned off using this feature. For additional details,
refer to the
Aruba MeshOS User Guide
and the
Aruba MeshOS Command Reference Guide
.
