4
AP-270-MNT-H1 Horizontal Mounting Kit
| Installation Guide
Figure 6
Adjusting the Inclination of the AP
8. Use the cable tie to fasten the cables on the bracket.
Mounting the AP to a Horizontal Pole
1. Begin by attaching the mounting bracket to the horizontal pole as shown in
Figure 7
.
a. Pass a hose clamp through the two slots on the mounting bracket, attach the mounting bracket to the
pole and tighten the clamp using a screw driver to twist its screw head.
b. Use another hose clamp through the other two slots on the mounting bracket and tighten the clamp.
Figure 7
Attaching the Mounting Bracket to a Horizontal Pole
2. Use the M10x30 screw (with washer) and M10 nut included in the package to attach the mounting holder
to the mounting bracket as shown in
Figure 8
.
M6x20 Screw
