16
1. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
2. If the appliance is being connected directly to the mains supply, an omnipolar
circuit breaker must be installed with a minimum gap of 3mm between the
contacts.
3. The installer must ensure that the correct electrical connection has been made
and that it complies with safety regulations.
4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by a properly qualified
person.
Safety Warnings
Your safety is important to us. Please read this information before using your
cooktop.
Yellow / Green
Black
Brown
Blue
220-240V~
380-415V~
220-240V~
1
2
3
4
1
2
3
4
L1
L2
N
220-240V~
25A~
Yellow / Green
Black
Brown
Blue
220-240V~
L1
1
2
3
4
L2
N
1
2
3
4
If the total number of heating unit of the appliance you choose is not
less than 4, the appliance can be connected directly to the mains by
single-phase electric connection, as shown below.
6. It is necessary to allow diaconnection of the appliance from the supply after
installation. The disconnection can be achieved by having the plug accessible or
by incorporating a switch in the fixed wiring in accordance with the wiring rules.