17
461308302 12/2014
Maintenance Schedule
The appliance should be checked by an
authorised person every year to ensure the
safe operation of the appliance.
As part
of the inspection, the authorised person
should also check that the wall brackets
are engaged and securely mounted to the
wall.
This maintenance is not covered by
warranty.
ECHNICAL INFORMATION
•
The installations, conversions and maintenance
operations listed in this part must only be carried out
by authorised personnel. The manufacturer cannot
be held responsible for any damage to persons or
property resulting from an incorrect installation of the
appliance.
•
If the appliances is installed on a base , measures
must be taken to prevent the appliance from
slipping from the base
•
The appliance is not intended to be operated by
means of an external timer or separate remote-
control system.
•
The safety and automatic adjustment devices of the
appliances may, during its life, only be modified by
the manufacturer or duly authorised supplier.
• This appliance shall be installed only by
authorised personnel and in accordance with
the manufacturer’s installation instructions, local
gas fitting regulations, municipal building codes,
electrical wiring regulations, AS 5601 - Gas
Installations and any other statutory regulations.
• Failure to install the appliance correctly could
invalidate any manufactures warranty and lead to
prosecution under the above quoted regulation.
• Before installation, make sure that local distribution
conditions (gas and electrical) are compatible with
the appliance’s adjustment. Refer to data label for
gas type.
• As it is not connected to a device for the evacuation
of the products of combustion, it must be installed in
accordance with current regulations and used in a
well ventilated location. Particular attention must be
paid to the regulations on ventilation.
VENTILATION
All rooms require an openable window or equivalent,
while some rooms require a permanent vent in addition
to the openable window.
Ventilation must be in accordance with AS5601 -
Gas Installations. In general, the appliance should
have adequate ventilation for complete combustion
of gas, proper flueing and to maintain temperature of
immediate surroundings within safe limits.
The use of a gas appliance results in production of
heat and moisture in the room in which it is installed.
Ensure that the kitchen is well ventilated; keep
natural ventilation holes open or install a mechanical
ventilation device (mechanical extraction hood).
Prolonged intensive use of the appliance may call for
additional ventilation, for example increasing the level
of mechanical ventilation where present.
UNPACKING YOUR COOKER
• Once the packaging has been removed, thoroughly
check that the appliance is in perfect condition. If you
have any doubts do not use the appliance and call our
Service Centre.
• Do not move the appliance by the handles.
• Some parts mounted on the appliance are protected by
a plastic film. This protection must be removed before
using the appliance. We recommend slitting the plastic
film along the edges with a sharp knife or pin.
The packaging materials used (cardboard,plastic bags,
polystyrene foam, nails etc.) must not be left anywhere
within easy reach of children as they are a potential
hazard source.
INSTRUCTIONS FOR THE INSTALLER
Summary of Contents for AFG900X
Page 27: ...27 461308302 12 2014 ...
Page 28: ...SPACE FOR DATA LABEL ...
