Artusi ADW8TTX, Instruction Manual

Page: 22 / 46

20
There are rust
stains on cutlery The affected items
are not corrosion
resistant. Avoid washing items that are not
corrosion resistant in the dishwasher.
Problem Possible Causes What To Do
Knocking noise
in the wash cabinet The spray arm is
knocking against
an item in a basket.
Interrupt the program, and rearrange
the items which are obstructing the
spray arm.
Rattling noise
in the wash cabinet Item of crockery are
loose in the wash
cabinet.
Interrupt the program, and rearrange
the items of crockery.
Knocking noise in
the water pipes This may be caused
by on-site installation
or the cross-section
of the piping. This has no influence on the
dishwasher function. If in doubt,
contact a qualified plumber.
The dishes
are not clean The dishes were not
loaded correctly. See PART
Ⅱ
“Preparing And Loading
Dishes”.
The programme was
not powerful enough.
Select a more intensive programme.
Not enough detergent
was dispensed. Use more detergent, or change
your detergent.
Item are blocking
the path of spray arms. Rearrange the items so that the spray
can rotate freely.
The filter combination in
the base of wash cabinet
is not clean or is not
correctly fitted.
This may cause the spray
arm jets to get blocked.
Clean and/or fit the filter correctly.
Clean the spray arm jets.
Cloudiness on
glassware.
Combination of soft
water and too much
detergent. Use less detergent if you have soft
water and select a shorter cycle to
wash the glassware and to get
them clean.
Black or grey
marks on dishes
Aluminium utensils
have rubbed against
dishes Use a mild abrasive cleaner to
eliminate those marks.