EN - 1
0
In order to change the rinse aid level,
follow the below steps before turning on
the machine:
•
Push the programme button and hold it
down.
•
Turn on the machine.
•
Hold down the programme button until
“rA” disappears from the display. Rinse
aid set follows water hardness set.
•
The machine will display the current
setting.
•
Set the level by pushing the programme
(+) and delay (-) buttons.
•
Switch off the machine to save the
setting.
The factory setting is “4”.
If the dishes are not drying properly or are
spotted, increase the level. If blue stains
form on your dishes, decrease the level
Level
Brightener Dose
Indicator
1
Rinse-aid not
dispensed
r1 is shown on the
display.
2
1 dose is
dispensed
r2 is shown on the
display.
3
2 doses are
dispensed
r3 is shown on the
display.
4
3 doses are
dispensed
r4 is shown on the
display.
5
4 doses are
dispensed
r5 is shown on the
display.
5. LOADING YOUR
DISHWASHER
For best results, follow these loading
guidelines.
We recommend that you place large items
(pots, pans, lids, plates and bowls) which
are heavily soiled in the lower basket.
The upper basket is designed for delicate
and lighter dishware such as glasses,
coffee and tea cups and saucers. Position
the dishes so that they will not get moved
by the spray of water.
Cutlery should be placed in the cutlery
basket. Items should be loaded individually
into the appropriate slots with their handles
downwards. Long utensils should be placed
horizontally on the baskets.
WARNING:
Take care not to obstruct
the rotation of spray arms.
5.1. Recommendations
Remove any coarse residue on dishes
before placing the dishes in the machine.
Start the machine with full load.
Do not overload the drawers or place
dishes in the wrong basket.
WARNING:
Always place sharp
utensils with the sharp point down and open
utensils with their openings down.
