8
clocking. If there is no MIDI clock present, the sequencer will play on the
internal clock. If MIDI clock starts, it will change sync to MIDI clock.
•
Internal
– Internal will select the internal Sequencer clock. In this mode,
external sync is ignored.
•
MIDI
– MIDI will select an external MIDI clock source.
If there is no clock, the
sequencer will not play
. When Clock is present, the sequencer will play in sync
with the clock.
Keyboard Parameters
Note Priority
•
Last Note
- DEFAULT - Last note priority means that the envelope will trigger
based on the last note played.
•
Low Note
- Low Note priority means if two notes are played at the same time,
the lower note on the keyboard is prioritized and played.
•
High Note
- High Note priority means if two notes are played at the same time,
the high note on the keyboard is prioritized and played.
Velocity Response
The MicroBrute does not receive or respond to velocity but it does send it.
The velocity curve that is sent from the MicroBrute can be set to 3 different settings.
•
Linear
•
Exponential
•
Logrythmic
FIRMWARE UPDATE page
