ARTURIA – ANALOG FACTORY 2.0 / EXPERIENCE. - MANUAL
5
4.
Do not use the instrument near water or moisture, such as bathtub, sink, swimming
pool, or similar place.
5.
Do not place the instrument in an unstable position where it might accidentally fall
over.
6.
Do not place heavy objects on the instrument. Do not block sinks or holes of the
instrument; those locations are used for air circulation to prevent the instrument
from overheating. Do not place the instrument near heat sink or any place of poor
air circulation.
7.
Only use the recommended specified AC adaptor (12V DC 1500mA)
8.
Make sure the line voltage in your location matches the input voltage specified on
the AC power adaptor.
9.
Do not open and insert anything on the instrument, witch may cause fire or electrical
shock.
10.
Do not splash any kind of liquid onto the instrument.
11.
Always take the instrument to a qualified service center. You will invalidate your
warranty if you open and remove the cover, and improper assembly may cause
electrical shock or other malfunction.
12.
Do not use the instrument with thunder and lightening present; otherwise it may
cause long distance electrical shock.
13.
Do not expose the instrument to hot sunlight.
14.
Do not use the instrument when there is a gas leak nearby.
15.
Arturia is not responsible for any damage or data loss caused by improper operations
to the instrument.
HANDING CD-ROMS:
Avoid touching or scratching the shiny underside (encoded surface) of the disc. Damaged or
dirty CD-ROM disc may not be read properly. Keep your CD-ROMs clean, using a
commercially available CD cleaner.
