1973-Pre Double Channel Output. Note that, although the Transformer Type switches are
placed below the Output Trim knobs, they affect the signal right after it enters the plug-in,
therefore the Transformer Type selection will have a subtle but effective influence on the
type of induced saturation and harmonic distortion.
Below the Stereo Link, we have the Stereo Mode switch. This is another very important
switch. It's where we change the behavior between True Stereo (L/R, which means Left/
Right) or Mid/Side mode (M/S switch position). The Mid/Side mode has been described in
detail in the
"Mid/Side mode" entry [p.26]
in the "1973-Pre OVERVIEW" chapter, so please
refer to that part of the manual if you want to clarify something. Bear in mind, though, that
it's with this switch that we change the mode configuration. Possible configurations are as
follows:
• Stereo Link On and Stereo Mode at L/R - True Stereo mode
• Stereo Link Off and Stereo Mode at M/S - Mid/Side mode (Stereo Link is
automatically turned Off)
• Stereo Link Off and Stereo Mode at L/R - Dual Mono mode
5.2.3. Some final words
Some final words to mention something very important. Usually, to change values in the
plug-in controls, we click on the corresponding control and drag the mouse up or down. If
the controls are switches, we simply click them to toggle On or Off. If we want finer editing
values, we can use Ctrl+Drag (Cmd+Drag on macOS). Alternatively, we can mouse Right-
Click and Drag. Using this key combination, the values change in a slower way, which allow
us to get more precise values easily.
Double-clicking a control changes it automatically to the default value. This also works with
Alt+Click (Opt+Click on macOS).
And that's it. We just finished describing all the controls you have at your disposal to process
sound in your DAW using the 1973-Pre. We hope you'll enjoy your new plug-in and the results
you get when using it, as much as we enjoyed making it.
36
Arturia - User Manual 1973-Pre - 1973-Pre CONTROL PANEL
Summary of Contents for 1973-Pre
Page 1: ...USER MANUAL...
