ARTRAY ARTCAM-320-THERMO-LAN3 Series, Instruction Booklet

Page: 14 / 14

- 14 -
8. System Requirements
8-1 Recommended System Requirements
●Intel chip set, Southbridge above ICH6
●CPU : Intel Core2duo 2.4GHz or higher
●Memory : Above 512MB
●OS: Windows XP or above
8-2
Minimum System Requirements
●USB2.0 Enhanced Host Controller
●CPU : Intel Pentium4 1.7GHz or higher
●Memory : Above 256MB
●OS: Windows XP or above
Caution
■Please refer the restrictions below when you use ARTCAM.
(1) Recommended System Requirements
If the system specifications do not meet the requirements recommended above, it may be difficult to run at the
maximum frame rate, especially at 48MHz high-speed mode.
(2) Connection of Multiple USB Devices
Please be aware that depending on the specifications of the user's PC, it may be difficult to supply the power to the
USB devices when multiple USB devices are connected.
(3) USB2.0 cable Extension
We cannot guarantee the functionality of the USB2 camera if the user adopts USB2.0 extension cables or repeaters
which are not confirmed by us. With the extension cables or repeaters, the bandwidth of transfer may differ, and thus
caused malfunctions such as a low frame rate or recognition failure on the camera.
What may cause the problem is that the regulation of the power lines becomes not enough, and so causes impudence
mismatch on data signals.
*For the recommended extension cable, please contact our sales department. (TEL: +81-3-3389-5488)
ARTRAY CO., LTD.
1-17-5 Kouenjikita, Suginami-ku, Tokyo 166-0002 Japan
Tel
：
+81-3-3389-5488 Fax
：
+81-3-3389-5486
Email
：
sales@artray.us URL
：
www.artray. us