background image

 
 

 
 

- 5 - 

Electro Magnetic Interference 

The camera may interference with electronic devices such as TV and radio. Please do not place the 

camera next to such equipment. 

 

Export Control 

This product is a Catch-all Control item subject to the Foreign Exchange and Foreign Trade Act and its 

relevant legislations. Except for exporting to the 26 white countries designated in the Cabinet Order, 

export licenses are required if the products are going to be used for military use or if the end user of the 

product is related to all kinds of military activities. If your circumstances cause the need to apply export 

licenses, please notify us before you place orders. Also, please notify us in advance if the end users or 

purposes of use change after the purchase and thus cause the need to apply export licenses. 

 

About the Japanese Security Export Controls, please refer to the webpage for Security Export Control 

Policy, the Ministry of Economy, Trade and Industry: 

www.meti.go.jp/policy/anpo/englishpage.html 

 

The above is based on the enforcement laws and regulations at the time of issuance of this document. 

Please be sure to check the latest laws and regulations before actually exporting this product.   

 

Guarantee 

To  save  the  environment,  we  do  not  issue  warranty  in  printed  format.  Instead,  all  records  of  the 

warranty periods, delivery dates and the customer information are well kept in our system. 

 

For more details, please refer to the following link: 

Hardware Warranty: http://www.artray.us/download/artray_warranty.pdf 

 

We  do  not  guarantee  the  functions  of  this  product  or  the  descriptions  on  this  manual  to  be 

completely  adapted  to  the  users

  end  applications  or  marketing  purposes.  We  are  also  not  held 

responsibility for any direct or indirect damages caused by our products under any circumstances. 

 

Please  do  not  use  this  product  for  a  task  that  require  high  reliability.  This  product  is  not 

manufactured  to  be used  as  medical,  nuclear, aerospace, transportation equipment or equipment  or 

that is highly related  to human safety. We are not  held responsibility for any damages on the  users

 

property, equipment or personal safety caused by this product. 

   

Disposal 

To dispose this product, please return the camera to us. If you decide to dispose the camera without 

returning  it  to  us,  please  follow  related  regulations  and  have  the  camera  disposed  as  an  industrial 

waste.  Please  always  keep  track  of  the  disposal,  and  make  sure  the  disposed  camera  cannot  be 

accessed or used by any third party.

 

Summary of Contents for ARTCAM-264IMX-BW-WOM
























Reviews: