Installation Pack:
16 wood screws
4 wall plates
12 set screws
1 allen wrench
INSTALLATION STEPS
1. Check that all the installation pack contents have been received. There should be 3
items as shown below:
2. DISCONNECT POWER SUPPLY. Connect timer to power supply. The timer can be
placed anywhere in the room ( recommended beside the light switches ) . Refer to in-
structions provided with timer for wiring details.
3. Determine location of towel warmer and provide a single gang electrical box 41/4 ” to the
right of bottom bar ( see page 3 ) . Note: where possible, locate unit so that at least one
of the upper brackets is attached to a firm wall stud.
Hardwire Kit
Timer
Bracket Installation: ( u se diagram 1 on next page as a guide)
3. Determine location of wall plates ‘ A ’ by either holding the towel warmer in desired
location or by using the approximate dimensions on page 3. Attach plates using the wood
screws provided.
4. Attach towel warmer to plates using the set screws ‘ B ’ and allen wrench provided.
