INSTALLATION STEPS
1. Check that all the installation pack contents have been received. There should be 3
items as shown below:
2.
2.
2.
2.
Determine location of towel warmer near an electrical outlet. The towel warmer cord is
4 ’ long.
Note: where possible, locate unit so that at least one of the upper brackets is
Note: where possible, locate unit so that at least one of the upper brackets is
Note: where possible, locate unit so that at least one of the upper brackets is
Note: where possible, locate unit so that at least one of the upper brackets is
attached to a firm wall stud.
attached to a firm wall stud.
attached to a firm wall stud.
attached to a firm wall stud.
Bracket Installation:
Bracket Installation:
Bracket Installation:
Bracket Installation:
( u se diagram 1 below as a guide )
3. Determine location of wall plates ‘ A ’ by either holding the towel warmer in desired
location or by using the approximate dimensions on page 3. Attach plates using the wood
screws provided.
4. Attach towel warmer to plates using the set screws ‘ B ’ and allen wrench provided.
Installation Pack:
•
16 wood screws
•
4 wall plates
•
12 set screws
•
1 allen wrench
Diagram 1
