Artora ArtoAmp 150, Owner'S Manual, Page: 14 / 24

From computer
Make sure the line input on the ArtoAmp is set to ‘BT’.
Activate Bluetooth on your computer and set up the ArtoAmp like you
would a Bluetooth headset. The ArtoAmp will show itself as ‘ARTORA’
when your computer is “looking” for it.
If asked for a code, press ‘0000’.
Please be aware that the ArtoAmp will take a few moments to
connect to your computer the first time.
When the ArtoAmp and the computer have been paired you can play
wirelessly at anytime in the future without having to pair the devices
again.
Changing between Bluetooth Devices
You can easily switch between playing on two different Bluetooth
devices.
Since the Bluetooth module in the ArtoAmp can only receive one signal
at a time, you have to disconnect one device from the ArtoAmp before
you can play from another. As a given example you have to remove
the ArtoAir from your iPod/iPhone before you can play music from you
computer – or conversely disconnect the Bluetooth connection from your
computer before you can use the ArtoAir.