Operation (moody cvx1)
From factory, all scene channels are programmed to cyan. At power on, moody will automatically
fade the master level to full over 5 seconds.
If lights are on, briefly press the control: moody fades the master level to zero over 5 seconds.
If lights are off, briefly press the control: moody fades the master level to the previously used
setting over 5 seconds.
Rotate control clockwise to increase master level. Rotate control counter-clockwise to reduce
master level. The LED indictor shows the master level and colour of the fixture.
To set a scene: please see programming instructions below.
Programming (moody cvx1)
To enter programming mode, press and hold control for 3 seconds.
Step 1
moody’s indicator LED flashes
red
to acknowledge it has entered
colour programming mode, then shows the colour of the fixture.
Step 2 - programme the colour (hue)
a)
Wait 5 seconds; moody will start slowly cycling through the colour
palette. When you see the colour you want, briefly press the
control.
b)
Alternatively, rotate the control clockwise or counter-clockwise to
move forwards or backwards through the colour palette. When
you see the colour you want, briefly press the control.
Overview
y
moody cvx1
-
Controls a single RGB fixture with CV dimmer output at 12 - 24V
-Output is RGB common anode
-Wheel controls intensity
N.B. During the programming process, the fixture will change
colour to show the effect of your programming.
