Artistic Licence DMX-Dongle II, User Manual

Page: 13 / 20

Artistic Licence (UK) Ltd. DMX-Dongle User’s Guide 13
Receiving
DMX512
The DMX program starts in receive mode.
The screen is split into two sections. The upper section shows
the levels of 64 channels of received data. The lower section
shows all the DMX512 timing and error information.
In receive mode the following keyboard controls are used:
Keyboard
Commands
HOME
Sets the channel display range to 1 - 64.
END
Sets the channel display range to 449 - 512.
PGDN
Selects the next channel display range. If the current range is 1
- 64 the next range will be 65 - 128.
PGUP
Selects the previous channel display range. If the current range
is 65 - 128 the previous range will be 1 - 64.
F2 - Start
Selects a new receive start code. Only DMX512 frames with a
matching start code will be displayed. Any frames which do not
match are counted and displayed in the status window
F3 - Base
Cycles through the available display bases for the channel levels.
These are decimal, hexadecimal and binary.
F4 - Reset Counters
Clears to zero the Frame and Error counters in the status
window.
F5 - Transmit
Selects DMX512 transmit mode.