Note: When the battery level is low, the indicator LED sparkles in blue (Bluetooth mode) or
in green (MIC mode). You will hear 3 beeps every minute and 1 double-beep in the fourth
minute. The headphone will switch off automatically in the fifth minute.
AUTO OFF
When the headphone is turned on without any connection to Bluetooth devices, it will be
turned off after 5 minutes. To turn on the headphone again, you should first slide the
power button to the OFF position. Then slide it back to ON again.
USE THE HEADPHONE
1. Connect the power of the transmitter. Switch on the audio source. The blue indicator
LED on the transmitter will flash.
2. Switch the On/Off switch on the headphone to ON position, then the blue LED indicator
will flash. The transmitter and the headphone will then be connected automatically. If
transmitter and headphone are not connected with each other, press and hold the PAIR
button on the headphone for about 5 seconds, the blue LED flashes quickly and the units
will be connected.
3. Before putting the headphone on, set the volume on the headphone to a low level, then
adjust the desired volume.
