TWEEDTONE20R
ADDITIONAL INFORMATION
•
This is a tube amp. Tube-driven amplifiers generally take around 10-20
seconds to warm up before you hear any sound after they’re switched
on. Use the standby switch during this time to prevent any loud pops and
to prolong tube life.
• Tubes are fragile and consumable. Over time, the tubes will wear out
and will need to be replaced. Take care when moving the amp, always
switch to standby when plugging in or unplugging your guitar or pedals
and try not to bump or knock the amp around in order to prolong the life
of your tubes.
• After amp is powered off, the sound will dissipate over a couple of sec-
onds. The audio will not cut off immediately. Put the amplifier into
standby mode before powering off.
• The tubes will light up and generate heat. If you ever smell any burning
smells or see any smoke, turn the amplifier off immediately and
contact us.
• If you have any questions or concerns, don’t hesitate to reach out to us
and we will do all we can to assist you.
Australia
United Kingdom
email: [email protected]
email: [email protected]
phone: 1300 489 816
phone: 0 808 198 0084
New Zealand
United States
email: [email protected]
email: [email protected]
phone: 0800 025 467
phone: 800 983 1047
Summary of Contents for TWEEDTONE20R
Page 1: ...TWEEDTONE20R MANUAL ...
