5.
Reverb Channel Selector
This switch controls which channel has reverb. Pushed in, channel 1 has
reverb, and when it’s clicked out again, channel 2 has reverb.
6.
Channel 2 Input
This is where you plug in your guitar for Channel 2.
7.
Channel 2 Gain Control
This knob controls the preamp gain for Channel 2. As you turn the knob
clockwise, the gain will increase, resulting in a louder signal. When it
gets closer to 10, there may be some slight break up or drive.
8.
Channel 2 Boost Switch
This switch adds a boost in volume to channel 2. This helps if you’re
using an electric guitar and want a more overdriven sound. It also helps
for guitars with lower output volume to really shine.
9.
Channel 2 Bass EQ Control
This knob controls the amount of low-end frequency in your guitar tone.
As it’s turned clockwise towards 10, the amount of bass in the guitar
tone will increase. If it’s set at 0, there will be less bass.
10.
Channel 2 Middle EQ Control
This knob controls the amount of mid-range frequencies in your guitar
tone. As it’s turned clockwise towards 10, the amount of mid-range
frequencies in the guitar tone will increase. If it’s set at 0, there will be
less mid-range.
11.
Channel 2 Treble EQ Controll
This knob controls the amount of high-end frequency in your guitar
tone. As it’s turned clockwise towards 10, the amount of treble in the
guitar tone will increase. If it’s set at 0, there will be less treble.
12.
Channel 2 Level Control
This controls the volume of channel 2. Turn the knob clockwise towards
10 to increase the volume.
BKS20V2
7
Summary of Contents for BSK20V2
Page 1: ...BSK20V2 MANUAL ...
Page 4: ...BKS20V2 4 ...
