Artist Guitars BAH200 Manual Download Page 5

INTRODUCTION

Thanks for purchasing your new Artist BAH200! This 200W bass amplifier 

head unit is ideal for players of any level. Paired with a cabinet, such as the 

Artist BCN110, this unit can be used for several applications, whether it’s a 

garage jam session, or on stage. This amp head was designed by the team 

at Artist Guitars to be a great stepping stone into the world of amplifier 

heads for the bass guitar enthusiast!

If you want to learn more about Artist Guitars, head to our website!

AU: artistguitars.com.au   

UK: artistguitars.co.uk

NZ: artistguitars.co.nz 

 

US: artist-guitars.com

FEATURES

The perfect companion for the gigging bassist and for those looking for an 

amp and cabinet set up without breaking the bank. This Class D Amp Head 

gives you tone, versatility and a massive load of features all in a compact 

package.

It features an earthshaking 200 watts RMS output at 4 ohms complete with 

a 5-band EQ for the precise tone calibration that every bassist needs. It has 

a button which can be toggled to suit whether you are using an active/pas-

sive input bass. It also features a built-in compression circuitry with ratio 

control to ensure that your output would have the same volume no matter 

how hard you play. There is also built-in Thermal and Over Current Protec-

tion.

Not only for gigs, the BAH200 also has an aux input to assist you with 

practice. Plug in your media device and play along to your favourite back-

ing tracks or songs!

Please note: 

This is an amplifier head only - it does not have any speakers. 

You must connect this to a bass speaker cabinet or headphones before use.

BAH200

5

Summary of Contents for BAH200












Reviews: