User’s Manual
475 Mini Crate Series
W-I
e
–
N
e
-R
Plein & Baus GmbH
12/11/2017
10
2
WIENER 475 Mini Chassis Operation
Switch on the AC Mains switch located at the power connector on the rear side.
To power the chassis on either the DC ON/OFF switch on the CML00 (rear side) or the
“Power”
on
the front display can be used on by pushing the switch up.
T
he main operation modes can be selected by pushing the “Mode Select” switch up or down.
Many main operation modes do have one or more submenus, which can be accessed by the following
special procedure.
You will use the following switches of the 475 mini chassis front panel:
Symbol
Description
Remarks
P▲
Push “Power” switch up (ON)
Main operation mode:
Switch the crate on.
Submenu:
OK button. Used to enter the selected
submenu, request to change a value,
accept the changes.
P▼
Push “Power” switch down
(OFF)
Main operation mode:
Switch the crate off.
Submenu:
CANCEL button. Used to leave a submenu,
discard the changes.
M▲
Push “Mode Select” switch up
Main operation mode:
Select the next operation mode.
Submenu:
Change the selected item to the next
possible state.
M▼
Push “Mode Select” switch
down
Main operation mode:
Select the previous operation mode.
Submenu:
Change the selected item to the previous
possible state.
The following example describes the detailed steps to change the IP gateway address of the fan tray.
Description
Switch
Display
( when 2 lines: display alternating
marked blue: flashing
switch the crate on
P▲
+5V 5.01V 1.2A
