artisan 2618-1B, Instruction Manual And Parts Catalog

Page: 6 / 33

—
4
—
5.Setting of bobbin
1
）
Pulling out 5cm thread tail from the bobbin.
2
）
Hold the bobbin so that the bobbin thread is would in
right direction and put it into the hook.
6.Threading of bobbin threads
1
）
Put the hook into the bobbin case and press
down the latch
①
.
2
）
While holding the needle threads by left hand, rotate the
hand-wheel one turn by right hand.
By pulling up the needle threads, as shown in the figure, the bobbin threads will be lifted.
Each combination of bobbin thread and needle thread should be aligned and led backward.