29
EN
B. ACTIVATION AND PAIRING
In order that the thermostat communicates with the heater and provides it with cor-
rect information, pairing is required.
■
■
On the heater, which was beforehand fixed on the wall and connected to
electricity :
01.
To switch on the heater, quit the position 0 on
the switch based on the backside of the heater
and put it on II
02.
Press the pairing knob of the heater
03.
The indicator light Power twinkles during several
seconds
■
■
At the same time, press during 3 seconds the central knob of your wireless
thermostat. The screen then indicates a temperature of 0. Press again the central
knob.
The thermostat and receiver are now paired; the green indicator light then stops
twinkling and remains on.
▶
Advise: you can control up to 5 heaters with the same remote controller :
pair the same
remote controller with radio receivers (repeat the action on each heater). The thermos-
tat’s defined value will be the same for each paired heater.
▶
Advise: the switch has two heating positions :
in mid-season, you can decide to select
position I for a half power heating: mild warmth and warm towels. In the winter, position
II for full power in order to heat the room.
CHOICE OF A MODE
The heater will heat to the defined value together with the selected mode if the
switch placed on the heater is on position I or II. It won’t heat on position 0.
The heating logo will then appear on the screen and the heating indicator light will
be red on the side of the heater (above the green indicator light).
To choose a mode, press the central knob : comfort / eco / holidays or user’s
program can be selected
A. PREDEFINED MODES : COMFORT / ECO / HOLIDAYS
• COMFORT MODE
: to maintain a 24/24 comfort temperature.
• ECO MODE
: to maintain a 24/24 « ECO » temperature.
• HOLIDAYS
: to maintain a lower temperature, when you are leaving your
inhabitation for a long while.
Switch —>
Pairing knob —>
Heating warning light —>
Power —>
