Matrix-702 Hardware Guide
ARTILA
11
Pin definition of 10/100LAN connector (LAN2)
PIN
Signal
1
ETx +
2
ETx -
3
ERx +
6
ERx -
3.3 Power Connector
Conn9 ~ +48VDC power line to either “Terminal Block” or “Power Jack”.
In the meantime, Ready LED will turn on in green color while power is properly
supplied. After system is ready for operation, Ready LED will keep in solid orange
color and a beep will be heard
3.4 Console Port
There is a serial console ports (4-pin wafer box header / JP1) inside the Matrix-702.
Pin assignment is: RX, TX, +3.3V, GND.
Therefore, you need to open the upper metal case and prepare or purchase a serial
console cable to use the serial console port.
Or, it can be purchased “Console Cable” from Artila, P/N is CB-PHDF9-050.
1
2
3
4
RX
TX
+3.3V
GND
