Matrix-510 User Guide
‧
9
‧
4. Artila Utility Software
The introduction of Artila utility software as follow:
4.1 update
Update loader, kernel or root file system image. Also use
update
—FORMAT
to format user disk.
Type
update
—help
to find the command usage.
Update can only operated under supervisor mode (password: root).
4.2 setuart
Configure serial port setting. An example show as followed to configure port 1 as RS-485 interface
with baud rate 921600. Please note only port 1 support 9-bit data at RS-485.
4.3 lcdctl
lcdctl is used to control the LCD display. Use lcdctl to display user message, please prepare 2x18 text
message and save it as a file. Then use lcdctl filename to display the message on the LCD screen.
Use
lcdctl
—ip 0
to display the ip address of the network setting on the LCD screen. The parameter
time
is the refresh rate in second and use
lcdctl
—cpu 0
to display the system loading information.
