M-606 User Guide
‧
4
‧
3.5 LCD Brightness Control
To configure the LCD brightness, you can use the utility software at Program/Backlight Control as
shown followed:
3.6 Network Settings
To configure the network setting by serial console, you can use command
ifconfig
as followed. To
check current network configuration, you can use command
ipconfig.
3.7 User Account Manager
To create user group and account, you can use command
usrmgr.
After user’s account and
password are created, user can add authentication in telnet and ftp function by using
telnetdcfg
and
ftpdcfg
.
3.8 Telnet Configuration
Telnet is enabled without authentication as factory default. To disable or add authentication, please
use command
telnetdcfg
as follow:
