Aport-211S User Guide
‧
14
‧
5.4 Forgot Password
If you forgot the Password, you can switch SW1 to Factory Default setting mode and use default IP
Address
192.168.2.127
and enter the Web console pages. Once the configuration is completed,
remember to switch SW1 back to Normal operation mode and reboot the module by Reset
Command or push reset button.
Password is not required for serial console mode. Therefore you can also use serial console to
reset the password.
5.5 Command Syntax
The command syntax is:
[Delimiter][Command][Carriage Return/
CR
][Line Feed/
LF
]
Delimiter (one byte):
The command begins with a delimiter of dollar sign $ and if Aport-211
receives the correct command it will response with an echo which begins with the delimiter of a
percentage sign %.
Command:
The command are ASCII string which contains three elements:
{Read/Write}{Function}{Parameter} as described as follow:
Command
Category
R
W
Function
(2 bytes)
Parameters
(command related)
Basic
G
S
BN:
Device Name
Max. 14 bytes
G
BM:
Model Name
Default
S
BP:
Password
Max. 8 bytes
G
BV:
Firmware Ver.
Default
Serial
G
S
SB:
Baud Rate
1200
2400
4800
9600
19200
38400
G
S
SD:
Data Format (Parity, Data,
Stop)
N72
E71
O71
N81
E72
O72
E81
O81
N82
Summary of Contents for Aport-211S
Page 2: ......
