4. DIP SWITCH Setting
The default setting for PIN 1 and 6 is ON. The rest
pins are OFF.
Pin NO.
Function
OFF
ON
1
TP Auto-Negotiation
Disable
Enable
2
Manual TP speed
10M
100M
3
Manual TP speed
N/A
1000M
4
Duplex mode
Half
Full
5
Flow Control
Disable
Enable
6
F/O mode
Force
Auto
7
Link Alarm
Disable
Enable
8
Reserved
-
-
NOTE:
Before changing TP speed, duplex mode and flow
control setting, please make sure PIN 1 is set to OFF.
When TP speed is set to 10M or 100M manually, PIN 3
needs to be turned OFF.
Under 1000Mbps, it supports full-duplex mode only.
5. LED Description
6. Technical Specifications
Fiber Transceiver Information
100M/1000M Dual Speed
LED
Color
Function
Power
Green
Power is available.
TX
Link/Act
Green
TX cable connection with remote
device is good.
Blinking
TX traffic is present.
FO
Link/Act
Green
F/O works in 100M.
Orange
F/O works in 1000M.
Blinking
F/O traffic is present.
FDX
OFF
TX works in Half-Duplex.
Green
TX works in Full-Duplex.
Speed
OFF
TX works in 10M.
Green
TX works in 100M.
Orange
TX works in 1000M.
Status
Green
TX and F/O link is up.
Orange
TX or F/O link is down.
Standards
IEEE 802.3, 802.3u, 802.3ab, 802.3z
Interface
1 X 10/100/1000 RJ-45 connector
1 X 100/1000 F/O port or SFP slot
LED
Power, FDX, Status, Speed,
FO Link/ACT, TX Link/ACT
Power
I/P: AC100-240V; O/P: DC5V, 2A
Power Consumption
2.2W
Shipping Weight
0.6KG
Dimensions
71mm(W)X94mm(D)X26mm(H)
Temperature
Operating: 0
o
~50
o
C; Storage: -20
o
~60
o
C
Humidity
5%~90% RH
Certification
FCC/CE Class A
Media
TP: EIA/TIA-568 CAT 5e, 1000M
Fiber 9/125, 10/125um single-mode fiber
*Please contact us for further reports and updates.
