5
Assembly
•
Place the round base on a flat surface
•
Insert the pole onto the base
•
Turn over the base with the pole inserted
and use the 4 x supplied screws to tighten the
pole to the round base
•
Twist the tube lock and pull out the pole in order to adjust the height.
•
Tighten the tube lock once you have adjusted the height.
•
Place the rear guard onto the motor housing and fix it with the central fixing nut by
screwing back clockwise.
•
Place the motor assembly and control panel onto the extension pole and secure by
turning the assembly knob clockwise.
•
Slide the fan blade onto the motor spindle ensuring that it notches to the rear tightly and
the splines are in line with the shaft.
•
Screw on the blade retaining the nut in anticlockwise direction.
•
Place and align the front grill with the rear grill. Raise the buit.in clips around the grill and
fasten them to secure the grill.
•
Secure further by turning the grill screw clockwise.