ARTHUR MARTIN AW6S7056AX, User Manual

Page: 18 / 64

Opening the door - Adding
garments
If the temperature and level of
the water in the drum are too
high and/or the drum is still
rotating you cannot open the
door.
While a programme or the delay start
operates, the appliance door is locked and
the indicator
is on.
1. Touch the button Départ/Pause to
pause the appliance.
Wait until the door lock indicator goes
off.
2. Open the appliance door. If necessary,
add or remove the items.
3. Close the door and touch the Départ/
Pause button.
The programme or the delay start
continues to operate.
At the end of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signal operates (if it is activated).
The indicator of the button
goes off.
The door unlocks and the indicator
goes off.
• The indicator is on.
• Remove the laundry from the
appliance.
• Make sure that the drum is empty.
• Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
• Close the water tap.
• Turn the programme knob to position
to deactivate the appliance.
The washing programme is completed,
but there is water in the drum:
• The drum turns regularly to prevent the
creases in the laundry.
• The door lock indicator is on. The
indicator flashes. The door stays
locked.
• You must drain the water to open the
door.
To drain the water:
1. If necessary, decrease the spin speed.
If you set , the appliance only
drains.
2. Press . The appliance drains the
water and spins.
3. When the programme is completed
and the door lock indicator goes
off, you can open the door.
4. Turn the programme knob to position
to deactivate the appliance.
The appliance drains and spins
automatically after
approximately 18 hours (except
for Wool programme).
Stand-by
Some minutes after the end of the
washing programme, if you do not
deactivate the appliance, the energy
saving status activates.
The energy saving status decreases the
energy consumption when the appliance
is on the stand by.
• All indicators go off.
• The indicator of the
flashes slowly .
• Press one of the options to deactivate
the energy saving status.
If you set a programme or an
option that ends with water in
the drum, the energy saving
status function doesn't
activate to remind you to drain
the water.
18