4
Charging the devices
The Mike 2.0 training station is now assembled, and ready to use. You should be sure the interface
and tablet are fully charged. The tablet is supplied with a connector on the unit to allow charging by
plugging into any AC receptacle. (Consult the Samsung documents for complete directions.)
The interface unit comes with a mini USB cable to connect the device to a USB device or comput-
er for charging.
1. To charge the battery, connect a micro USB cable to the connector on
the interface. Plug the USB cable into a USB charger or computer port.
2. The LED will blink red every 10 seconds while charging.
Charging times for these devices can vary. Generally, full charging can be completed in two (2) to
three (3) hours.
Turning Devices off and on
Tablet power : Consult the Samsung material supplied with the tablet.
Turning on the interface: There is a single white button on the interface. Press the button and re-
lease once. Red and green leds will flash indicating the device is charged and active.
Turning off the interface: To disconnect, press and hold the top button on the sensor for 5 seconds.
When the LED indicator turns red and stops blinking, release the button. The Led should turn off
and stay off. The device is now off.
