ARTHUR HOLM DynamicShare AHDSSA, User Manual

Page: 14 / 26

14
AHDSSA
• AHSACBP: Stand Alone control box for sharing, input selection AND
priority.
On the MASTER unit, it is possible to have control buttons with
PRIOTITY Share control function.
VIEW push button: Press this button to select the local HDMI-1, HDMI-
2, HDMI-3, or loop shared input source. Four LEDs indicate the HDMI
local signal displayed on the monitor:
∙ LED1: HDMI1 input signal selected
∙ LED2: HDMI2 input signal selected
∙ LED3: HDMI3 input signal selected
∙ LED4: LOOP IN input signal selected. The monitor shows the
shared signal on the system.
NOTE: With the VIEW button, you can only select the input when a
valid signal is present on the HDMI input.
Share push button: Press this button to share the local signal. The red
LED indicates that the AHDSSA sends the local image to the HDMI
loop, and all the monitors display this signal. Pressing this button
again, the red LED goes off and the monitors display the local signal
on screen.