15
PACKING INSTRUCTIONS
ATTENTION !
UNPACKING
1
-
Remove the inside protective foam piece before using the device.
(It is recommended to keep the foam which can be placed inside
again if the monitor is moved).
2
-
Securely mount the monitor to the table using the two mounting
brackets (included).
PACKING
3
-
When transporting, raise the monitor housing up. Press and hold the
front button for 8 seconds until you hear a beep.
4
-
Hold the hatch before lowering the monitor housing then disconnect
the power to disable beep. Now the buttons are non
-
operational.
5
-
Place the supplied protective foam.
8 sec.
“beep”
Power
FOAM
Albiral Display Solutions, s.l.
c/Fátima 25, 08512 BCN
-
Spain
tel. +34 938 502 376 www.arthurholm.com /www.albiral.com
Thank you for purchasing our product, we hope you are completely satisfied with it. If you have any
questions you can contact us by email [email protected] or by phone +34 938 502
376 office hours 9am
-
2pm & 3pm
-
6pm GMT +1.
WARNING: To protect the product when moving place on the supplied protective foam, with screen
facing up and strapped securely to a pallet.
Protective foam
