35
AHLINK
AHlink is used to control and set-up the unit.
By default, the AHlink signal on the unit is deactivated. To activate the
AHlink signal, press for 5 seconds the external Up and Down screen
buttons located on the top monitor frame or press for 5 seconds the UP
and Down contact close on the GPI connector. You can also activate
the AHlink signal with the LCD (Interactive Setup Display) located under
the monitor. Press the Down key near the LCD (Interactive Setup Display),
until the "<AHlink> ¨option appears. Press the OK button to activate the
AHlink signal on the unit. When the AHlink signal is activated, the sound
of 5 beeps will indicate that the AHlink signal is active on the unit.
The unit will automatically deactivate the AHlink signal if there is no
device (mobile or tablet) connected for more than 2 minutes. The user
can also deactivate the AHlink signal using the APP on mobile or tablet.
When the AHlink signal is deactivated, the sound of a long beep will
indicate that the AHlink is no
longer available on the unit.
To control and set-up the unit
using AHlink, download AHlink
App from the App Store (IOS
system) or from Google Play
(Android system). The App is free.
Execute the AHlink App on your
mobile phone.
On the AHlink App options, it
is recommended not to select
Auto Connect and select Portrait
on Orientation. To connect to
the device, select Scan for local
devices.
