11
Controls & Input connectors
MONITOR ADDRESS
Below the monitor, there is a screen to configure the monitor. Press the UP
or DOWN buttons to change the function. Press the OK button to select the
function. Change the parameter using the UP or DOWN buttons and press
OK again to save the changes.
AHnet ID
Selects the number AHnet ID to RS422 to externally control
the monitor
Input select
Selects the input source signal (DVIA, DVI1 or DVI2)
Brightness
Configuration of the monitor brightness level
Contrast
Configuration of the monitor contrast level
Backlight
Configuration of the monitor backlight level
Status information
List of the monitor status to service
Summary of Contents for AH15D3 HDGA
Page 21: ......
