20
ISD MENU
2) FirmWare
Data that refers to the firmware version (FW) of the equipment (example: FW
Ver = 1.32). If you wish to update the FW version, please contact us.
3) Serial Number
Serial number of the device (example: serial number of the device =
02658748). The serial number is stored inside each device.
The serial number can also be obtained via AHnet and AHlink.
- OSD MENU -
∙ AHNET (GENERAL PROTOCOL)
CONTROLS
· The ISD will show the AHnet address which will be accompanied by an
acoustic signal "BEEP" (example: Address: (001)). Once the signal has been
heard, the "UP & DOWN" buttons will allow the user to scroll through all the
variety of menus that the device contains. To enter into any specific menu,
simply press the "OK" button.
· How to modify the values within each menu? The values can be selected
through the "UP & DOWN" buttons. To save the selected value, press the "OK"
button or wait 3 seconds for it to be automatically saved.
The connection through RS422 allows the control of up to 30 devices per
line. The last device (an only the last one) needs to have the termination
activated.
Summary of Contents for AH12D216A
Page 13: ...13 PACKING INSTRUCTIONS ...
