950-0073-00 B SM, English, Arthrex Synergy UHD4 System
14 of 74
CAUTION: Do not install the device
in a location near heat sources such
as air ducts or radiators and do not
expose the device to direct sunlight,
excessive dust, or mechanical vibration.
1.7
Unpacking and Inspecting the
Device
Upon receipt, carefully unpack the Synergy
UHD4
Controller Unit (CCU) and accessories. Ensure
contents are complete and are free from
damage. If any damage is noted contact your
Arthrex Customer Service. Contact the
Manufacturer for Return Authorization PRIOR to
shipping your device for service. Save
ALL
packaging materials; they may be needed to
verify any claims of damage by the shipper.
1.8
Returning the Device
If it becomes necessary to return the device,
always use the original packaging. The
manufacturer does not take responsibility for
damage that has occurred during transportation
if the damage was caused by inadequate
transport packaging. Please make sure that all
required information has been supplied. Call
Arthrex for a RMA Number for the device return
for service.
Owner’s Name
Owner’s Address
Owner’s Daytime Telephone Number
Device type and model.
Serial Number
Detailed explanation of the damage.
NOTE:
1. The CCU shall be cleaned per section
Cleaning and Sterilization prior to returning
for service.
2. The Camera Head shall be cleaned and
Sterilized per Cleaning and Sterilization prior
to returning for service. Camera Head shall
be clearly labeled as “Sterile.”
Equipment will not be repaired unless
decontaminated as stated above prior to return
to the manufacturer.
