6
fuse in back panel should be checked. Notice: If it need replace, using
same spec fuse that earmarked in back panel. In the computer light,
circuit board has a 3AT fuse. If the fuse has blown, it need replaced by
professional. computer light also have two heat protectors, they should
cut off power supply when the temperature is too high. If it happened, fan
should be checked whether there is a barrage or not. If fan is dirty, please
switch on the power supply after clean it. Examine operation of fans, if it
doesn’t work, please mend it by professional.
6.
Cleanly maintenance
In order to computer light operate steadily, it should keep clean.
Suggest clean lighting body and fan every 15 days. Lens and dichroic
filter should be cleaned at stated time to assure the best light effect. Don’t
use any deliquescent cleaner to clean dichroic filter.
7.
Warning
Don’t dismounting or refit computer light.
Don’t touch water and other kind of liquid and metal substance
(IP20).
Don’t install in a high wettest condition.
Don’t illuminate on tinderbox, computer light must keep 5M away
from tinderbox.
Computer light should keep 0.5M away the surface of adjacent
object.
Don’t look beam in the face, or it may injure your eyes.
Notice: modulator tube will reach to a high temperature when it
works. It must be completely cool at least 15 minutes before
operate again.
8 Difficulty disposal
