7
3.2. Connections
•
Power Supply
~100-240 Volt AC, 50-60 Hz, earth contact type plug - Powercon
Connected load 350 VA (W)
T6.3A (micro-fuse 5x20mm)
Please see printing on the case for the right electronic supply!
Disconnect from the mains supply for changing the fuse and use
only the above described micro-fuse type.
•
DMX
USITT DMX-512 Standard input/output in 3 pin / 5 pin
connectors. Pin 1 = [Ground] / Pin 2 = [-] / Pin 3 = [+] / Pin
4&5 N.C. The DMX- Addressing starts at the DMX-
Address [001].
4. The Menu Field
You’ll find the control board on the side part of the bottom. It allows
you to make all necessary adjustments of the
light
.
.
With the Enter-
key you get into the main menu. Afterwards you can navigate
through the menu with the Up/Down-keys. Push the Enter-key to get
in the next menu level or to confirm your settings. Make them and set
functions ON/OFF with the Up/Down-keys. Confirm and save it with
the Enter-key. Push the Function-key to cancel the entry and go
back to the main menu.
To lock or unlock the keys of the menu field press Mode+Enter+Up simultaneously.
DMX512
DMX-controller
120 Ohms
||
Summary of Contents for Magic 2R
Page 2: ...2 Notes ...
