5
Remember to place the device in a place with an optimal signal. Preferably, it should be
placed near a window at a suitable distance from metal surfaces and electrical devices.
Quick Set
1.
2.
3.
4.
5.
Plug the power adapter providing the power supply to the weather station to a permanent
electrical energy source (without a wall switch) with alternating voltage 120v – 230V.
Place the mirror behind the weather station next to the wireless external transmitter. There
is a cover in the rear part of the external transmitter. Slide it and open, then put 2 AAA alkali-
ne batteries inside. Make sure the channel switch is set to position 1. Put the battery com-
partment cover back in place.
Make sure that number 1 (i.e. channel 1) is displayed next to the temperature and external
humidity. You can choose channel 1 by pressing the button.
The weather station will start receiving a signal from the external transmitter within few
seconds. In the end, put the external transmitter in a dry and shaded place.
In the event of a power cut, repeat the device setting procedure.
Warning!
The external transmitter handles transmission in an open space for a distance up to 60
meters. However, the actual transmission range may vary depending on the signal's route. It
means that each obstacle (roof, walls, floors, ceilings, high trees etc.) reduces the transmis-
sion range by half.
s3 weather station configuration
/ CHANEL
