ARTEX PRODUCTS / ACR ELECTRONICS, INC.
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
ARTEX ELT 4000S
Y1-03-0364 Rev E
Company Confidential
25-62-38
Page
43
of
54
1)
Install the necessary mounting structure as appropriate.
2)
Mark and drill the six mounting holes with a #19 or 4.25mm drill. Refer to Figure 9 on
page 42 for the mounting hole locations circled in red.
NOTE:
The use of substitute mounting hardware is acceptable provided the
hardware used meets or exceeds the strength and corrosion resistance of
the original hardware.
3)
Torque screws to 12±1 lb.-
in (136 ±11 N•cm).
Figure 10 Bracket Open with Pin Extended
