ARTEX/ACR Electronics, Inc.
A3-06-2824 Handheld Programmer Operations Manual
Y1-03-0272 Rev. F
Company Confidential
Page 25
4.7.1
Aviation User / Tail Number (Short)
1.
Select ELT Baud rate.
2.
For the ELT 345 and ELT 1000, refer to Note 1 on page 23 before continuing.
3.
For the ELT 3000 and ELT 4000, refer to Note 2 on page 23 before continuing.
4.
Select Protocol.
5.
Select Country Code.
6.
Go to Graffiti screen and tap on letter/numbers.
7.
Enter the tail number of the aircraft, which is up to seven alphanumeric
characters.
•
Acceptable characters are letters (A-Z), numbers (0-9), a hyphen (-), a
space ( ), and a slash (/).
•
If fewer characters are entered, that will be reflected in the final hex code.
•
Spaces are automatically filled in on the left of the data.
8.
Tap
“
Done
”
when finished.
9.
Tap “ENTER” button on
Program screen. The 24-digit hex code is shown at the
bottom of the screen, with the abbreviated 15-digit hex code below it.
10.
For ELT 345s or ELT 1000s only:
tap “Program”; quickly place ELT switch in
the test mode and release. (Quickly is <1 second).
11.
Tap the “Program” button to program the ELT
.
12.
Ensure that screen shows “Programming Successful”
.
13.
Verify ELT using
“Sarcalc”
, as described in Subsection 6.2.
4.7.2
Serial User / ELT / COSPAS (Short)
1.
Select ELT Baud rate.
2.
For the ELT 345 and ELT 1000, refer to Note 1 on page 23 before continuing.
3.
For the ELT 3000 and ELT 4000, refer to Note 2 on page 23 before continuing.
4.
Select Protocol.
5.
Select Country Code.
6.
Go to Graffiti Screen and tap on letter/numbers.
7.
Enter the serial number, which matches the serial number seen on the product
label, or a number that was designated for use by the competent national
authority.
8.
Enter the COSPAS-SARSAT TAC number.
9.
Tap
“
Done
”
when finished.
