Artesyn RTM-ATCA-749X, Quick Start Manual, Page: 2 / 2

RTM-ATCA-749X-Quick Start Guide
Artesyn Embedded Technologies
Marketing Communications
2900 S. Diablo Way, Suite 190
Tempe, Arizona 85282 Artesyn Embedded Technologies
Lilienthalstr. 17-19
85579 Neubiberg/Munich
Germany
Finding more information
For more information on the product,
see the RTM-ATCA-749X Installation
and Use manual and other related docu-
mentation.
Go to http://www.artesyn.com/com-
puting for technical documentation.
Technical Assistance
To request technical assistance, visit
http://crcportal.artesyn.com/
Install the RTM (Cont’d)
6. Insert the RTM blade fully and then
push the handles inwards. The latches
automatically lock the handles.
Note : If the shelf is powered, as soon
as the RTM is connected to the front
blade, the blue LED lights up and
remains lit until the lower handle of
the RTM and the lower handle of the
front blade are closed.
7. Close the lower handle of the front
blade so that the payloads of the RTM
and the front blade are powered up.
The blue LEDs on both the front blade
and the RTM start blinking.
8. Fasten the faceplate screws on the
RTM.
9. Wait until the blue LEDs on the front
blade and the RTM move to unlit
state. A blue LED that is not lit indi-
cates that the payload of the front
blade and the RTM has been powered
up and is active.
10.Plug the interface cable into the face
plate connectors, if applicable.
4