Artesyn MITX-CORE-820 Installation And Use Manual Download Page 87

Page: 87 / 133

BIOS

MITX-CORE-820 Installation and Use (6806800M10H

)

5.4.2.5.1 Software Feature Mask Configuration

5.4.2.6

Memory Configuration

5.4.2.7

System Agent (SA) Configuration

Table 5-12 Software Feature Mask Configuration Field Description

Field

Description

RAID0

Enables/Disables RAID0 feature.

RAID1

Enables/Disables RAID1 feature.

RAID10

Enables/Disables RAID10 feature.

RAID5

Enables/Disables RAID5 feature.

Table 5-13 Memory Configuration Field Description

Field

Description

Memory Frequency

Maximum memory frequency selections in Mhz.

Table 5-14 SA Configuration Field Description

Field

Description

Intel(R) VT for Directed I/O
(VT-d)

Press Enter to bring up the Intel(R) VT for directed I/O (VT-d)
configuration menu. See

Intel(R) VT for Directed I/O (VT-d)

Graphics Configuration

Press Enter to access the graphics configuration menu. See

Graphics Configuration

Summary of Contents for MITX-CORE-820






































































































































Search results

Summary of Contents for MITX-CORE-820

Reviews:

Artesyn MITX-CORE-820, Installation And Use Manual, Page: 87 / 133

Search results

Summary of Contents for MITX-CORE-820

Reviews: