manualshive.com logo in svg

Artesyn MITX-CORE-820, Installation And Use Manual, Page: 88 / 133

Share
Download
Artesyn MITX-CORE-820 Installation And Use Manual Download Page 88

BIOS

MITX-CORE-820 Installation and Use (6806800M10H)

87

5.4.2.7.1 Intel(R) VT for Directed I/O (VT-d)

5.4.2.7.2 Graphics Configuration

Table 5-15 Intel(R) VT for Directed I/O (VT-d) Field Description  

Field

Description

Intel(R) VT for Directed I/O 
(VT-d)

Enables/Disables Intel(R) Virtualization Technology for Directed 
I/O (VT-d) by reporting the I/O device assignment to VMM 
through DMAR ACPI tables.

Table 5-16 Graphics Configuration

Field

Description

Primary Display Selection

Selects the primary display device.

DVMT Pre-Allocated

Selects pre-allocated graphics memory size used by the internal 
graphics device. This has no effect if external graphics are 
present.

DVMT Total Gfx Mem

DVMT5.0 DVMT graphics memory size. This has no effect if 
external graphics are present.

GT Turbo Mode Control

Enables/Disables GT Turbo Mode Control.

IGD Configuration

IGD Configuration. See 

IGD Configuration

.

Summary of Contents for MITX-CORE-820






































































































































Reviews:

No comments