Artesyn MaxCore MC1600, Installation And Use Manual, Page: 42 / 118

40 MC1600 Extreme Edge Server Installation and Use (6806870A02A)
System Overview
System Overview
1.6.1 CPU SKU Support
Many different CPU SKUs are available, having various core counts, core frequencies, cache
sizes, and performance levels. On the Extreme Edge Server, the following SKU has been
qualified in the initial product release.
1.6.2 Memory Controller
The Broadwell-DE processor offers an Integrated Memory Controller (IMC) that has a
two-channel memory interface operating in the Independent Channel Mode. Each channel
consists of 64 data and 8 ECC bits, plus address, control, and management signals.
On the Extreme Edge Server, a DDR4 memory interface is supported. DDR mode is determined
by the DDR3_4_STRAP pin strapping. Signal DDR3_4_STRAP is pulled high to select DDR4
mode.
Dual memory channels are supported with one DIMM per channel at up to 2166 MT/s. Single
and dual rank DIMMs are supported. Supported DRAM device densities are 4Gb and 8Gb.
Signaling voltage for the DDR4 interface is 1.2V.
Possible DIMM types are shown in Table 1-3 , they can be ECC or non-ECC modules. The type
qualified for the initial product release is highlighted in green. These are x72 (ECC-capable)
modules.
Table 1-2 CPU SKU Support
CPU Type Cores Frequency Cache
DDR4
Speed
TDP Artesyn Part #
Xeon D-1567 12 2.1GHz 18MB DDR4-2133 65W 5106814F44
The extended temperature-capable DIMMs are required for extended temperature
MC1600 Extreme Edge Server SKUs.